camera MasterRig

Your DSLR or mirrorless, turned into a long-term cloud timelapse camera

MasterRig: DSLR or mirrorless camera controlled for cloud timelapse

MasterRig is a modular system around your camera. The MasterControl controller drives it over USB, keeps it powered and uploads every photo to the cloud; add the MasterCase outdoor case and solar power for the field. It arrives ready to use.

  • check_circle Upload cloud en temps réel via 4G/5G ou WiFi
  • check_circle Mode hors ligne — upload au retour de la connexion
  • check_circle Surveillez et contrôlez à distance via le tableau de bord
  • check_circle Capture JPEG + RAW
  • check_circle Recovers by itself when the camera or the connection gets stuck

MasterControl — the controller

A standalone device that runs your camera: it takes the shots, uploads them to the cloud, watches over the site with its sensors and takes care of the camera's power.

photo_camera

Controls the shots

Drives your camera over USB and shoots on the schedule you set from the dashboard.

cloud_upload

Uploads to the cloud

Every photo goes to the cloud in real time over 4G/5G or WiFi. Offline, it keeps the photos and uploads them when the connection is back.

monitor_heart

Telemetry, sensors and alarms

Sends its status and sensor readings to the dashboard and alerts you when something needs attention, such as fogging glass.

solar_power

Saves energy on solar

On solar-powered sites it switches the camera off between shots, so the battery lasts longer.

autorenew

Restarts the camera by itself

If the camera freezes, MasterControl power-cycles it. No site trip for a reboot.

MasterCase — the outdoor case

Built to stay outdoors for months or years: rain, sun, night, construction sites. Nylon PA12 printed with MJF, dyed black and bead-blasted, with the finish of an industrial product rather than a hobby 3D print.

window

Glass window

A glass window in front of the lens.

air

Anti-condensation vent

Equalises the pressure, so the case breathes without letting water in.

wb_sunny

Sun hood

Reduces the heat of the sun on the case and reflections on the glass.

dew_point

Fogging alert

A temperature and humidity sensor in MasterControl computes the dew point and warns you before the glass fogs up.

bolt

Arca-Swiss quick release inside

The camera slides in and locks in a few seconds, no tools needed.

door_back

Rear door, 3 lever latches

Opens quickly and gives full access to camera and controller.

sync_alt

Mounts on any side

Two screws move the 1-inch ball to whichever side you need.

construction

RAM / 1-inch ball compatible

Mounts on super clamps, ball heads, poles, cranes and scaffolding.

add_box

Accessory shoe on top

For the accessories your project needs.

cloud_upload

Controller in the door

MasterControl sits inside the door: it drives the camera over USB, shoots and uploads in real time. With the door open you see its screen from the inside.

Cloud Services

Monitor your project, day by day

MasterLapse dashboard: projects with live photo, capture status, battery, storage and connection of every camera Discover our Cloud Services arrow_forward
tune

Adapt as conditions change

Light and seasons change: adjust format (JPEG or RAW+JPEG), ISO, exposure compensation, white balance, aperture and shutter speed remotely to keep every frame consistent.

RAW+JPEG from the Pro plan

tune [TODO Luca: settings image]

Compatible cameras

Over 200 camera models are in our compatibility catalog: Canon, Nikon, Sony, Fujifilm and more. Tell us yours and we confirm it works before you order.

photo_camera

Reflex / Hybrides

Connecté via USB-OTG au contrôleur Android

expand_more

Votre appareil n'est pas listé ou est marqué « à tester » ? Nous pouvons ajouter sa prise en charge. Contactez-nous sur WhatsApp

Marque Famille d'Appareils Connexion Statut
Canon EOS DSLR (xxxxD series) Tested: 1300D Models: 1000D, 1100D, 1200D, 1300D, 1500D, 2000D, 3000D, 4000D USB check_circle Fonctionnel
Canon EOS DSLR (5D/6D series) Tested: 5D Mark II Models: 5D/II/III/IV, 5DS, 5DS R, 6D, 6D II USB check_circle Fonctionnel
Canon EOS Mirrorless (R series) Tested: EOS R, R6 Mark III Models: R, RP, R3, R5, R6/II/III, R7, R8, R10, R50, R100, R1 USB check_circle Fonctionnel
Canon EOS Mirrorless (M series) Models: M, M2, M3, M5, M6/II, M10, M50/II, M100, M200 USB help À tester
Canon EOS DSLR (xxD series) Models: 10D–90D, 77D USB help À tester
Canon EOS DSLR (1D/1DX series) Models: 1D/II/III/IV, 1Ds/II/III, 1DX/II/III USB help À tester
Nikon DSLR (D3300 and newer) Models: D3300–D3500, D5100–D5600, D7000–D7500, D500, D600–D780, D800–D850, Df USB help À tester
Nikon Z Mirrorless Models: Z5, Z6/II/III, Z7/II, Z8, Z9, Z30, Z50/II, Zfc, Zf USB help À tester
Fujifilm X / GFX (with remote capture) Models: X-T1–X-T5, X-Pro2/3, X-E3, X-H1/H2, GFX 50S/50R/100/100S/100 II USB help À tester
Panasonic Lumix S (L-Mount) Tested: S1M2 Models: S1, S1M2, S1R, S1H, S5, S5II, S5IIX, S9 USB check_circle Fonctionnel
Sony Alpha (A5000–A7IV, A9) Models: A5000, A5100, A6000–A6700, A7/II/III/IV, A7R/II/III, A7S/II, A7C, A9 USB help À tester

Check your camera

Tell us which camera you use: we confirm it works with MasterRig before you order.

Modules and prices

Start with the controller, add what your site needs.

memory

MasterControl

The controller: takes the shots, uploads them to the cloud, monitors the site with sensors and alarms, and power-cycles the camera when it freezes.

350 € Required

shield

MasterCase

The outdoor case for camera and controller, built to stay out for months or years.

350 €

solar_power

Solar power

Solar panel, charge controller and 12 V LiFePO4 battery, for sites without mains power.

350 €

Prices are one-time purchases, VAT excluded. Storage and dashboard come with a cloud plan, the same for every MasterLapse product. See cloud plans